Pantograph monitoring sensor with on-board AI.
Complete ECS panto system:
ECS/Camera unit size 275 x 180 x 235 mm (W x L x H) Weight = 3.7 Kg
Alim/Com box size 210 x 300 x 520 mm (W x L x H) Weight = 8 kg.
IP54 PROTECTION
Power supply 110 / 220 VAC, or 24 VDC
Power consumption: 30 W. (2 W. standby mode possible if triggered via foot switch)
Operating temperature -10°C to +45°C
If camera clipping unit: -40°C to +180°C
Sun protection cap: optional for camera, to be developed for ECS
Max. train, streetcar speed 160 Km/h
Min. speed= 5 km/h.
Daylight operation only, night lighting (spotlight) required
GO-5100-USB Go Series 5.1-megapixel 2/3” CMOS imager (global shutter). 2464 x 2056 (74 to 120 FPS)
Optics (focal length): to be defined according to camera/catenary distance
CE (EN 61000-6-2, EN 61000-6-3), FCC Part 15 Class B, RoHS/WEEE
Installation parameters
System distance / LAC (contact wire) 3 m/ 10 m (min/max)
Camera orientation to horizontal 45° +/- 5
Field of view at object level 2m x 1m (h x L). +- 10%
Communication: Ethernet RJ45, 4G modem (optional), wifi (optional)
Fault detection on raised and lowered pantographs Yes
Detection of horn presence/absence Yes
Detection of pantograph bow inclination Yes > 1° Yes
Chip detection on friction strip Yes
Detection of groove(s) on friction strip Yes
Counting of pantographs raised and lowered Yes
Counting the number of train passages Yes
Detection and display of streetcar front (with N° if present) : Yes
Train analysis time Yes| Real time (< 2 minutes)
Image reconstruction of complete streetcar roof: Yes (optional)